Brunswick Tenacity Grit Bowling Ball
Brunswick Tenacity Grit Bowling Ball
- Color: Blue/Purple/Silver
- Coverstock: URG (Ultra Responsive Grit)
- Weight Block: Tenacity Low RG
- Factory Finish: 500/1000/3000 Siaair
- Flare Potential: High
- Radius of Gyration (RG): 16lbs - 2.49; 15lbs - 2.503; 14lbs - 2.520
- Differential (Diff): 16lbs - 0.052; 15lbs - 0.052; 14lbs - 0.052
- Intermediate Differential (Diff): 0.018
- Fragrance: N/A
Additional product information:
The Tenacity Grit combines our URG coverstock with our Tenacity Low RG asymmetrical core that combines power and versatility all in one ball. The Tenacity Grit will be valued by league bowlers and tournament players for it’s strong mid-lane and powerful backend. The Tenacity Grit will produce strong mid-lane motion and backend with outstanding pin carry on medium oily lane conditions. Clean your ball with Brunswick’s Big B Bowling Ball Cleaner after every use to reduce oil absorption.
Sanded 3000 Siaair
If you liked your Tenacity you will love the Grit. For me the Grit starts up about 36 inches sooner giving me a good 4-5 more boards of over all performance and absolutely no quit through the pins. Its a great ball on fresh medium oil conditions and compliments the original Tenacity perfectly. It allows you to chase the oil inside and then ball down to keep that same consistent ball reaction.
This ball revs up so easy and is beautiful to watch downlane. I drilled mine up 70x4x35 and I can count on this ball to make a good turn for me on heavy oil conditions. Just fired off another 300 with it yesterday. The Dynamicore technology is amazing and seams to carry any hit that is even close to the pocket. This ball will go down as one of Brunswick's finest creations!!
After rolling the Tenacity Grit, you're going to think you're throwing a ball with snow tires on it. This ball really bites the lane and has a beautiful shape to the pocket. What's really great about it is that it doesn't hook early or burn up, it just powers right through the pins. For bowlers like myself that don't have a high rev rate and sometimes struggle getting the proper shape, this ball addresses those concerns above and beyond.
Mine is drilled pin under middle finger. Oil does not challenge this ball. You can freewheel it and it will respond. A great piece and a complement to your arsenal if you run into a fair amount of volume.
Brunswick Regional Staff
Pin Length: 3"
Starting Top Weight: 2.5 oz
Ball Weight: 15 lbs 3 oz
Ball: 65 x 5 x 35
X Hole (if there is one): none
Rev Rate: 375 rpms
Ball Speed:17.5 mph off hand
PAP/Track: 4 3/4 over 3/4 up
Grit: 500/3000 Siaair
Type: (Matte, Polish, Sanded): Sanded
Lengths of patterns: 41 foot house shot and 44 foot sport
Volumes: moderate and heavy
Type: house and sport
Length: Clean through the heads with a continuous backend reaction
Back End: Hard arc
Overall Hook: Fairly strong
Midlane Read: Moderate
Breakpoint Shape: Hard arc
Likes: Strong continuous motion with good hitting power
The Tenacity Grit is a stronger version of the original Tenacity. It reads earlier in the midlane area while still providing good backend recovery. This ball is not the earliest of reactions but is not allergic to oil. This ball will provide you with the ability to play in the oil and create angle to the outside part of the lane. So far, I have found the Tenacity Grit to perform best when my heavier oil balls are starting to be a bit too early. This one is a step down from balls like the Kingpin Max and the Quantum Bias. The Tenacity Grit also works very well when used in the oilier part of the lane on fresher house conditions. Overall, the Tenacity Grit adds versatility and continuation to the Brunswick lineup. If you are looking for length and continuation on moderate to heavier conditions, take a look at the Tenacity Grit
Ball: Tenacity Grit
The new Tenacity Grit is a good compliment to the original Tenacity when you need to see the lanes a little earlier yet still retain the hitting power aided by the Dynamicore. This ball with the out of box finish picks up in the mid lane strong with good continuation though the pins on med-heavy to heavy oil. It also takes to surface change well if you need to fine tune your motion. If you are looking for a good ball for the heavier patterns, this is a good ball for your bag.
LOVED this ball. Earlier than the original Tenacity, its also smoother and more all purpose. Very easy to read and control. Drilled ours 90 x 3 3/4” x 35, our benchmark layout. When playing on oil it reads the midlane without jerking left if it sees some dry. DON'T FORGET THE DYNAMICORE! That gives it even better hitting power! Don't just believe my word though! Look at Jason Sterner at the US Open. He destroyed everyone on his squad with this ball!!