Product Video Icon
  • Hammer Rip'd Bowling Ball
All colors vary somewhat from the picture shown.

Hammer Rip'd Bowling Ball


$169.95
FREE SHIPPING
On Orders Over $50

Loading...
  • Color: Black/Gold/White
  • Coverstock: Aggression Hybrid CFI
  • Weight Block: Rip'd
  • Factory Finish: 500/1000 Abralon Polished w/ Powerhouse Factory Finish Polish
  • Flare Potential: High
  • Radius of Gyration (RG): 2.48
  • Differential (Diff): 0.054
  • Intermediate Differential (Diff): 0.014

Hammer Rip'd Bowling Ball

Hammer’s new Aggression CFI coverstock is so good, we couldn't come out with just one ball that featured it. The Rip’D will give you length through the front of the lane with explosive backend reaction while the Rip’D Solid will give you incredible mid lane traction with a continuous down lane motion. Both balls feature the new Rip’d core, which is a combination of the successful Scandal and Gauntlet core shapes. With Hammer’s patent pending carbon fiber infused coverstock and outer core, the Rip’D and Rip’D Solid carry Hammer’s industry leading three year warranty.

Versatile Hybrid Ball from Hammer
By: Michael Thompson on March 26, 2018

BALL LAYOUT USED: 70 x 5 3/8 x 30 The new Rip’D is special ball motion that has been added to the Hammer brand of balls. This ball offers a STRONG polished hybrid coverstock that can handle a heavier medium lane pattern with ease. For me this ball is a great compliment to the Rip’D SOLID when the lanes have broken down a little bit and you need to play a deeper inside line if needed. With my rev rate, I am able to use this ball all 3 games during league with ease and post some big scores as well. I see the Rip’D to be about 3-5 boards more overall than the BW Gold and offers a strong continuation down the lane as well. This ball is also great for those lower rev rate bowlers that need a ball that can play down & in and then move a little left when the lane dries up and be able to open up the angles and carry much better. With the Carbon Infused coverstock and the 3 year warrantee that Hammer provides for this ball, this is a GREAT value for your money! I think this a great ball for bowlers looking to have a versatile Hybrid ball that will flip down the lane when moving inside the lanes as they dry up. Very versatile ball… You will be impressed!

New Hammer "one/two" punch
By: Chris Monroy on March 02, 2018

Here are my thoughts concerning the new Rip’d and Rip’d solid by Hammer. I am doing this as a joint review for both balls as they are being released together as a new “one/two punch” in Hammer’s asymmetrical bowling balls. The Rip’d comes in comes factory polished and comes with the Aggression Hybrid CFI cover in black/gold/white swirl. The Rip’d Solid comes with Aggression Solid CFI cover at 2000 Abralon and has a blue/black/orange swirl cover. Both feature the same asymmetrical core and like with all Hammer releases, use carbon fiber technology and come with an industry leading 3 year warranty. My “vitals” as a bowler are as follows: PAP= 5 9/16 over and 1/8 up- 405 rev rate. I have tried the Rip’d at factory finish and at 4000 Abralon. I have tried the Rip’d Solid at box surface and at an Ebonite “Clean n’ Sheen” finish. I have tried both releases on various THS as well as USBC White. Both of my staff balls came with the same pin distance and top weight so for comparison purposes, I drilled both with the same layout- 60 x 5 ¼ x 40- no balance hole was used. There is a definite difference in reaction between the 2 new releases. At box, the Rip’d does glide through the front quite easily and especially for an asymmetrical core, gets around the corner quite easily and continues on both THS and White patterns. With 4000 Abralon (just to knock off the factory shine) any slight over/under was erased but in the overall, the same reaction characteristic was present. The new Rip’d reminds me a bit of the original Widow Legend in terms of being able to get around the corner with ease in an asymmetrical core. There is a significant difference in performance with the Rip’d Solid with the different cover. At box surface, I was easily 10-15 boards further left throwing to the same spot. I had to really rotate the ball at the release in order to get the ball down the lane and to recover in the back. At “Clean n’ Sheen” finish, I liked the performance better. Still, because of the different cover, I was further left in the address in order to get the ball through the front. There is a clear distinction in reactions from both releases from the different covers and as such presents great options for bowlers. I believe that the Rip’d Solid is best suited for higher volumes of oil or a bowler with higher ball speeds. A person with a lower rev rate would also see increased ball motion from the Rip’d Solid. The Rip’d will perform better on medium to higher volumes as well as medium volumes and I think will be a little more versatile in terms of being able to conquer a variety of conditions and be “user friendly” for more bowlers. See your proshop for more information about the new Hammer “one/two punch”- the Rip’d and Rip’d Solid.

Add a Review